Electrical and Control System
81
Service Manual – Floortec 760
7 Lift the rubber mat (I) in the battery
compartment
8 Disconnect the battery charger electrical
connector (J)
9 Remove the screws (K)
10 Remove the battery charger (L) by bringing it
backward in the direction shown by the arrow
(M), and then by lifting the front part in the
direction shown by the arrow (N)
Assembly
11 Assemble the battery charger in the reverse
order of disassembly and note the following:
–
When installing a new battery charger, this
must be set according to the type of batter-
ies which are going to be installed on the
machine (see the procedure in the relevant
paragraph) Set the battery charger before
installing the batteries
P200328
Battery Charger Removal/Installation (Floortec 760 B) (Continues)