Electrical and Control System
79
Service Manual – Floortec 760
P200326
12 Remove the screw (Q) on the inner side of the
reduction unit
13 Tighten the screw (R) on the threaded hole (S) of
the reduction unit
14 With a plastic mallet slightly tap on the screw
(R) in the direction shown by of the arrow (T)
until the gear assembly with shaft (U) comes
out
15 Remove the spacer (V) and the gear (W) from the
shaft (X) with key
Assembly
16 Assemble the gear in the reverse order of
disassembly
Drive Shaft (Big) Gear Removal/Installation (Continues)