Electrical and Control System
73
Service Manual – Floortec 760
Reduction Unit Removal/Installation
Disassembly
1 Remove the main motor (Battery version) or
the dynamotor (Petrol version) and separate it
from the reduction unit (see the procedure in the
relevant paragraph)
2 Remove the screw (A) of the reduction unit (B)
3 Remove the four screws (C)
4 Remove the reduction unit (B) by pushing it in
the direction shown by the arrow (D) and by
disengaging it from the shaft with key (E) If
necessary use a plastic mallet
Assembly
5 Assemble the reduction unit in the reverse order
of disassembly
P200322