Electrical and Control System
66
Service Manual – Floortec 760
P200318
10 On the rear side of the machine, cut the clamps
(K) fastening the wiring harness (L); cut also the
inner clamp (M)
11 Disengage the protection caps (N) and
disconnect the electrical connections (O) of the
main motor
12 Loosen the clamp (P) and disconnect the “wet by
pass” hose (Q)
13 Remove the screws (R) with nut (S)
14 On the inner side of the main motor (T), remove
the screws (U)
15 Carefully remove the main motor assembly with
the reduction unit (V)
Main Motor or Fan Removal/Installation (Floortec 760 B) (Continues)