Side Broom System 126
Service Manual – Floortec 760
P200350
Note:
This procedure refers to the
right side reduction unit; the
procedure for the left side
reduction unit is the same.
Disassembly
1 Drive the machine on a level floor and ensure
that it cannot move
2 Turn the ignition key to “0”
3 Remove the hopper by using its transport handle
and wheels
4 Disengage the front fastener and open the
battery/engine compartment hood.
5 Remove the screws (A) and the side panel (B)
6 (Right side) Remove the nuts (C) and the right
cover (D)
(Left side) Lift the tab (E) and turn the knob (F)
counter-clockwise until it is disengaged, then
open the left door (G)
7 Remove the screws (H) and the nut (I), then
remove the side broom reduction unit guard (J)
Right Side Broom Control Cable Removal/Installation