Main Broom System
116
Service Manual – Floortec 760
Front skirt disassembly/assembly
1 Empty the hopper (as shown in the User
Manual)
2 Drive the machine on a level ground that is
suitable for checking the skirt height, after
assembling it Make sure that the machine
cannot move independently
3 Turn the ignition key to “0”
4 Remove the hopper by using its transport handle
and wheels
5 On the hopper (A), remove the screws with the
nut (B) and remove the metal strap and the
front skirt (C)
6 Install the front skirt by performing the steps 3
to 5 in the reverse order
7 Check the front skirt height (see the procedure
in the relevant paragraph)
Rear Skirt Disassembly/Assembly
1 Remove the main broom (see the procedure in
the relevant paragraph)
2 Fully turn the main broom height adjusting
knob (C) counter-clockwise (by lifting it)
3 In the main broom compartment, remove the
screws (D), then remove the metal strap (E) and
the rear skirt (F)
4 Install the rear skirt (F) by performing step 3 in
the reverse order
5 Adjust the height of the rear skirt (F) (see the
procedure in the relevant paragraph)
6 Fully turn the main broom height adjusting
knob (C) clockwise (by lifting it)
7 Install the main broom (see the procedure in the
relevant paragraph)
P200342
Skirt Removal/Installation (Continues)