Main Broom System 101
Service Manual – Floortec 760
Main Broom System
Functional Description
The machine start-up, determines the operation of
the main broom which is held in a pivoting support
fastened on the frame
The broom is made to rotate by the reduction unit to
which is connected a pulley with an hexagonal drive
hub On the opposite side the broom is supported by
a idle hub fixed to a plate stuck to the broom holder.
The knob in the rear side of the machine determines
the broom lowering/lifting and therefore the relevant
pressure on the floor.
The door on the left side of the machine can be opened
with the foldable lever, so that the idle hub mounting
plate can be reached
By loosening the two knobs fastening the mounting
plate to the broom holder, the idle hub can be removed
by releasing the main broom which can be removed
after removing the hopper
Wiring Diagram
P200337