140
Service Manual – SC401, SCRUBTEC 344
34 - Scrub System, Disc
Maintenance and Adjustments
Brush or Pad-Holder
Installation
According to the kind of cleaning to be performed,
the machine can be equipped either with the brush
(A) or the pad-holder (B) with pad (C) together with
the appropriate deck
1 Place the brush (A) or the pad-holder (B) under
the brush deck
2 (If equipped) Turn the ignition key to “I”
3 Press the main button
to start the
machine
4 Press the main button
(LED on) again
5 Lower the brush deck by pressing the pedal
6 To activate the brush engagement function,
press the vacuum button
and the main
button
simultaneously for one second
Removal
7 Press the main button
(LED off)
8 Lift the brush deck by pressing the pedal
9 To activate the brush disengagement function,
press the vacuum button
and the main
button
simultaneously for one second,
then wait for the brush to fall on the floor.
Note:
When the brush engagement/
disengagement function is activated,
main button
LED flashes.
A
B
C
Figure 4:
C
B
A
