Page: 1
SC1500 How To
Prepare for Use
1
This is how the
machine should look
when you enter the
room.
2
Disconnect battery and
store onboard charger
cord.
3
Check the EcoFlex
container.
4
Check recovery tank,
ball float and catch
cage.
5
Inspect and Install
squeegee and hose.
Install pad or brush for
disc machine.
6
Fill machine with water
using front or rear fill
port
(water should not
exceed 130°F)
.
Machine Operation
1
Familiarize yourself
with the control panel.
Refer to the owner’s
manual.
2
Burst of power delivers
more water, detergent
and pressure to clean
stubborn areas.
3
For double scrubbing,
swing the squeegee to
the right then flip down
the squeegee kickstand
to hold the back blade
off the floor. Flip the
kickstand up when
done then vacuum
solution from the floor.
www.totalwarehouse.com
833-868-2500