1.
Preface
The S Booster is designed for the boosting and transfer of clean water to cleaning
equipment within the food industry.
It is important that your operational staff reads these directions for use prior to the
installation and start of operation. Operation as laid down in these directions for use
will
ensure an optimum level of hygiene in your factory and a minimum level of
maintenance and repair work.
1.0
Application
The S Booster is made of corrosion resistant materials, mainly stainless steel, and is
therefore, especially suitable for application within the food industry. If you need
information on further applications, please contact Ecolab.
1.1
Warnings
The special warnings
CAUTION, ATTENTION
and
NOTE
used in this Technical
Manual have the following meanings:
CAUTION:
This term is used to highlight the fact that complete or even partial
failure to properly adhere to operating instructions, working
instructions, specified working sequences and similar can cause
personal injuries or accidents.
ATTENTION:
This term is used to highlight the fact that complete or even partial
failure to properly adhere to operating instructions, working
instructions, specified working sequences and similar can cause
damage to the equipment.
NOTE:
This term is used to draw attention to a particular feature.
