20
General information
1.7 Alarm lights and monitoring indicators
Attention!
In case of engine overheating or of hydraulic overheating, contact your after-sales service.
Do not open the radiator cap when the liquid is under pressure. There is a risk of accidents.
Engine coolant temperature alarm (8)
This signal lamp turns on and you will hear a beep sound when the coolant reaches 112°C.
If this signal lamp turns on while driving, park the vehicle as fast as possible on the roadside, turn the engine off and
check the cooling circuit.
Engine oil pressure alarm (9)
This signal lamp turns on and you will hear a beep sound when the engine oil pressure is too low.
If the signal lamp turns on while driving, park the vehicle as fast as possible on the roadside, turn the engine off and
check the engine oil circuit.
Hydraulic oil temperature alarm (10)
The signal lamp turns on and you will hear a beep sound when the hydraulic oil temperature exceeds 80°C.
If the signal lamp turns on while driving, park the vehicle as fast as possible on the roadside, let the engine idle and check
if the radiator fan is running.
•
-
If the fan is not running, stop the machine, let the system cool down and contact the after-sales service.
•
-
If the fan is running, let the vehicle idle and wait 10 minutes before checking that the temperature falls.
Clean the radiator.
•
-
If the temperature does not fall, stop the machine and immediately contact your after-sales service.
Battery load alarm (11)
The signal lamp turns on when the power at the battery terminals is lower than 9V.
Indicator, parking brake tightening / brake fluid level default (12)
When this signal lamp is on, the vehicle will not start
•
-
This signal lamp turns on when the parking brake is tightened.
•
-
This signal lamp turns on when the brake fluid level is too low. Park the vehicle as fast as possible on the
roadside, turn the engine off and check the brake fluid level.
!
Operator’s Manual City Ranger 3500
