Data plate
The data plate of the unit holds the following information:
1. type of unit
2. unit order no.
3. unit serial no.
Note: When contacting Nilan A/S with questions about the product, please be ready to quote unit type, order no.
and serial no. This information will enable the service department to identify relevant information about your
unit. The service department can then provide you with information and answers about the unit, its parts and
the software used.
Warnings and regulations
Inappropriate use
The unit must not be used for extraction of shavings or shreds or where there is a risk of explosive
gases.
No duct connection
If one or more of the spouts are not connected to a duct, a protective net with a mesh width of max. 20
mm must be fitted on this/these.
Opening the unit
Do not open the service doors until the safety switch has been switched off and the fans have stopped.
Unit in standby
When a ventilation unit is not in operation, humidity from the rooms may penetrate into the ducts and
create condensation. Condensate water may leak from the valves and damage furniture and floors.
Condensation may also form inside the unit, which can damage its electronics and fans.
6