403
On-Camera Flash Photography
D
Third-Party Flash Units
The camera cannot be used with flash units that would apply voltages
over 250 V to the camera’s X contacts or short-circuit contacts on the
accessory shoe. Use of such flash units could not only interfere with
normal operation of the camera but also damage the flash sync circuits
of the camera and/or flash.
D
i-TTL Flash Control
When an optional flash unit that supports the Nikon Creative Lighting
System is mounted on the camera and set to TTL, it will operate in i-TTL
mode, employing monitor preflashes for flash photography using i-TTL
balanced fill-flash and the like. i-TTL flash control is not available with
flash units that do not support the Nikon Creative Lighting System.
D
Studio Strobe Lighting
Rear-curtain sync cannot be used with large studio strobe lighting
units, as they will not sync correctly.
Summary of Contents for Z50
Page 525: ......