321
Menu Guide >
B
The Setup Menu
Network Settings
Select
Create profile
to create a new network profile (
357). If more than one profile already exists, you can press
J
to
select a profile from a list. To edit an existing profile, highlight it
and press
2
. The following options will be displayed:
•
General
: The profile name and password. Select
Profile name
to
rename the profile (by default, the profile name is the same as
the network SSID). To require that a password be entered
before the profile can be changed select
On
for
Password
protection
(to change the password, highlight
On
and press
2
).
•
Wireless
: Adjust settings for connection to a network via a router
(infrastructure mode) or for direct wireless connection to the
camera (access-point mode).
-
Infrastructure mode
: Enter the network SSID and password and
choose the type of authentication/encryption used on the
network (
OPEN
or
WPA2-PSK-AES
). The channel is selected
automatically.
-
Access-point mode
: Enter the SSID and choose a channel (select
Auto
for automatic channel selection or
Manual
to choose
the channel manually) and authentication/encryption type
(
OPEN
or
WPA2-PSK-AES
) used for connection to the
camera. If
WPA2-PSK-AES
is selected for
Authentication/
encryption
, you can also set the camera password.
•
TCP/IP
: If
Enable
is selected for
Obtain automatically
, the IP
address and sub-net mask for infrastructure mode connections
will be acquired via a DHCP server or automatic IP addressing.
Select
Disable
manually to enter the IP address (
Address
) and
sub-net mask (
Mask
). Note that an IP address is required for
infrastructure mode connections.
Summary of Contents for Z50
Page 525: ......
