Nikon Z50, Reference Manual

Page: 137 / 526

109
Shooting Controls
t
Auto slow sync
: As for “slow sync”, except that the flash
fires only as required.
o
u
Auto slow sync + red-eye : As for “slow-sync + red-eye”,
except that the flash fires only as required.
o
s Flash off : The flash does not fire.
b ,
P
,
S
,
A
,
M ,
k
,
p
,
n , o , s ,
f
,
V
,
T
,
U
,
5
D
Lowering the Built-In Flash
To save power when the flash is not in use,
press it gently downward until the latch
clicks into place.
D
Using the Built-In Flash
• Remove lens hoods to prevent shadows.
• If the built-in flash is used with continuous low-speed or continuous
high-speed selected for release mode, only one picture will be taken
each time the shutter-release button is pressed. Selecting continuous
high-speed (extended) enables burst photography and disables the
built-in flash.
• The shutter release may be briefly disabled to protect the flash after it
has been used for several consecutive shots. The flash can be used
again after a short pause.
Option Description Available in