Nikon Total Station DTM-322, Instruction Manual, Page: 57 / 185

Total Station DTM-322 Instruction Manual 43
Getting Started 3
Jobs created before version 1.10
The current database version is 1.10. The job name
prefixed by "?" mark is the job created in the earlier
version of the database.
If a job is from an earlier version, you cannot open it,
set it as the control job, or display its job information.
However, you can use the
DEL
softkey to delete it.
Measuring Distances
C
WARNING – Never look at the sun through the telescope. If you do, you may damage or lose
your eyesight.
Sighting a prism reflector.
Sight the telescope to see crosshairs at the center of the prism
reflector.
When you enter a point name or number, the system searches in the current job first. If the point is not found in
the current job, the search is automatically extended to the control job. If the point is found in the control job, the
selected point is copied to the current job as a UP record.
Jobs created in version 1.02 or earlier are not compatible with version 1.10 or later. Download all jobs before you
update the software that is running on the instrument.
For information on how to assemble the prism reflector, see Setting Up the Prism Reflector, page 16 .
Sighting a single prism