- 28 -
4.9
Autofocus (film scanners only)
The focus of the image can be adjusted by clicking the
Autofocus button shown below (this button is not displayed
when an AX-110 or AX-210 flatbed scanner is selected).
You can choose a location in the image as the focus position by
clicking this button while simultaneously holding down the
option
key. If you click the Autofocus button without specifying
a focus position, the autofocus position chosen will be the
center of the image.
Focus Position Cursor
You can cancel the focus position cursor by clicking the
Return
to crop
button.