manualshive.com logo in svg

Nikon P-400R, Instructions Manual, Page: 83 / 115

Share
Download
Nikon P-400R Instructions Manual Download Page 83

P-400R Digital Microscope Instructions 

67

 

6 

Advanced Use of Pla

yback Functions 

6 

 

Advanced Use of Playback Functions 

Using the playback menu 

The playback menu can be used to delete multiple images at one time and specify 
the settings for playing back images. 

Displaying the playback menu 

In playback mode, pressing the [MENU] button 
displays the [Playback menu] screen in the LCD 
monitor. The playback menu is displayed in this 
screen. 

 

 

[Playback menu] screen 

 

 

Playback mode 

 

 

Using the playback menu 

The playback menu is operated by using the 
multi-selector on the LCD panel. 
Use the top and bottom buttons of the 
multi-selector to select the item, and then press 
the right (or [OK]) button to apply the selection.
Pressing the left button redisplays the 
upper-level menu item. 

 

 

Multi-selector 

 

Restarting playback mode 

If the [MENU] or playback button is pressed when the playback menu is displayed, 
the P-400R is placed in playback mode again, and a saved image is displayed in the 
LCD monitor. 

[MENU] button 

LCD panel 

Summary of Contents for P-400R




















































































































Reviews:

No comments