Nikon P-400R Instructions Manual Download Page 82

Page: 82 / 115

P-400R Digital Microscope Instructions

Advanced Use of C

apturing Functions

5.12

Setting the Scale

You can specify the settings for the scale displayed during observation and capturing.
The procedure is as follows.

In shooting mode, press the [MENU]

button to display the [Shooting menu]
screen.

Select [Scale configuration], and then

press the [OK] (or right) button.

The [Scale configuration] screen appears.

Select the desired category, and then

press the [OK] (or right) button.

The menu for the selected category
appears.

Use the multi-selector to specify the

setting.

The following shows the categories and the
settings that can be specified.



Scale display

OFF (initial setting)

Display ON

Display/Overwrite

If [Display/Overwrite] is selected, the
scale is embedded in saved images.



Line width

Thick

Thin (initial setting)



Line color

Red, Green, Yellow, Blue, White, or
Black (initial setting: Green)

Press the [OK] (or right) button to apply

the specified settings.

The [Shooting menu] screen appears again.

Summary of Contents for P-400R




















































































































Search results

Summary of Contents for P-400R

Reviews:

Nikon P-400R, Instructions Manual, Page: 82 / 115

Search results

Summary of Contents for P-400R

Reviews: