manualshive.com logo in svg

Nikon P-400R, Instructions Manual, Page: 71 / 115

Share
Download
Nikon P-400R Instructions Manual Download Page 71

P-400R Digital Microscope Instructions 

55

 

5 

Advanced Use of C

apturing Functions 

5.5 

 

Selecting the Exposure Mode 

You can set the exposure mode used for observation or capturing. The procedure is 
as follows. 

 

 1 

  In shooting mode, press the [MENU] 

button to display the [Shooting menu] 
screen. 

 

 

 

 2 

  Select [Exposure mode], and then press 

the [OK] (or right) button. 

The [Exposure mode] screen appears.   

 

 3 

  Select one of the following three 

exposure modes: 

 

Prog. AE (initial setting) 

The P-400R automatically sets both the 
shutter speed and the camera gain. 

 

Shutter-priority AE 

The P-400R automatically sets the 
camera gain according to the shutter 
speed set by the user. 

 

Manual 

The user manually sets both the shutter 
speed and the camera gain. 

 

 4 

  Press the [OK] (or right) button to apply 

the selection.   

The [Shooting menu] screen appears 
again. 

 

 

 

 

 

  About overexposure and underexposure indications 

If exposure mode is Program AE or Shutter-priority AE, depending on the 
brightness of the object, the correct exposure might not be obtained. If the object 
is overexposed, either P OVER (in Program AE mode) or S OVER (in 
Shutter-priority AE mode) is displayed. If the object is underexposed, P UNDER 
(in Program AE mode) or S UNDER (in Shutter-priority AE mode) is displayed. 

 

Summary of Contents for P-400R




















































































































Reviews:

No comments