manualshive.com logo in svg

Nikon P-400R, Instructions Manual, Page: 63 / 115

Share
Download
Nikon P-400R Instructions Manual Download Page 63

P-400R Digital Microscope Instructions 

47

 

4 

Basic Operations for Capturing an

d Playing Back 

 

4.6.2 

 

Deleting the currently displayed image 

To delete an image in playback mode, perform the following procedure. 

 

 1 

  In playback mode, display the image 

you want to delete. 

 

 

 

 2 

  Press the delete button ( ). 

A message asking you whether you really 
want to delete the image is displayed. 

 

 

 

Playback mode 

 

 

 3 

  Use the top and bottom buttons of the 

multi-selector to select [Yes] or [No]. 

 

 

 

 4 

  Press the [OK] button or the right 

button of the multi-selector to apply the 
selection. 

If you selected [Yes], the image is deleted 
and a completion message is displayed for 
two seconds. 
The screen shows the playback mode 
again and the previous or next image of 
the deleted image is displayed.

 

 

 

 
 
 
 
 
 

LCD panel 

[OK] button 

LCD panel 

Delete button 

Summary of Contents for P-400R




















































































































Reviews:

No comments