2
Preparation
24
Field Station NPL-632 Instruction Manual
Setting the position of the target plate
B
Tip –
When using a prism at a short distance, set the prism at a slight angle to the sighting axis
rather than completely square.
If using a single prism, make sure that the target plate is aligned with the tribrach
adapter and the prism.
To set the position of the target plate:
1.
Use the two set screws supplied to attach the
target plate to the single prism holder.
2.
Move the target plate within the screw holes
until the apex of the wedge pattern is aligned
with the vertical axis of the prism and the
tribrach adapter.
Carrying the Instrument Case
Two belts are provided to assist you in carrying the instrument in its case safely and
comfortably:
•
To carry the case over your shoulder, attach
one belt to the case on the side of handle.
•
To carry the case as a backpack, attach two
belts to the case on the side that displays the
Nikon sticker side.
shows how to attach the belt to the instrument correctly.
Center on axis
Summary of Contents for NPL-632
