Nikon NPL-322, Instruction Manual

Page: 86 / 197

4 Applications
72 Total Station NPL-322 Instruction Manual
6. To record the point, press
[ENT]
. PT defaults to the
specified PT + 1000.
After recording the point, the display returns to the
observation screen. When you press
[ESC]
, the display
returns to the PT/CD/R input screen. If you entered the
stakeout point using a single point name, the PT
defaults to the last PT + 1.
If you selected a point from the list, the display returns
to the list, unless all points have been selected. Press
[ESC]
to return to the point input screen.
Advanced feature: Specifying a stakeout list by range input
1. To input points by range, press the
Fr/To
softkey in the PT field.
2. Enter the start point (Fr) and the end point (To).
The range between Fr and To must be less than
1001 points.
To switch between display screens, press
[DSP]
. This function works as in the angle-distance stakeout, except
that the screen counter (for example, S-O1/8) is not displayed. For more information, see Using [DSP] to switch
between display screens, page 70 .
Once a measurement is taken, the Cut/Fill value and Z coordinate are updated as the VA is changed.
Use the Add Constant field in
MENU > Settings > Stakeout
to
specify an integer that is added to the point number being staked to generate
a new number for recording the staked point. The default value is 1000. For
example, when you stake out PT3 with an Add Constant of 1000, the default
number for SO record is 1003. For more information, see
Stakeout, page 117 .