Nikon NPL-302 Series, Instruction Manual

Page: 96 / 234

4 Applications
76 Pulse Laser Station NPL-302 Series Instruction Manual
Determining station elevation
40.1
1.
Press [4] or select
Remote BM
in the Stn
Setup menu.
2.
Enter the BM point and press
[ENT]
. When the
point is found, it appears briefly. The cursor
then moves to the HT field.
3.
Enter the HT and press [ENT] .
4. Sight the BM point and press [MSR1] or [MSR2] .
5.
To take an F1/F2 measurement, press the
F2
softkey or flip the telescope to Face-2 after a
distance measurement.
The updated station coordinates are displayed.
You can change the HI in this screen.
6.
To record the updated STN, press [ENT] .
The
F2
softkey is not available on the NPL-332.
When the HI is changed, the Z coordinate is updated before the station is recorded.
You must complete a station setup before you use the Remote Benchmark function.