Nikon NPL-302 Series, Instruction Manual

Page: 90 / 234

4 Applications
70 Pulse Laser Station NPL-302 Series Instruction Manual
Sighting the backsight by entering the azimuth angle
1.
To enter the azimuth angle to the backsight
point, press
[2] or select
Angle
in the
Backsight screen.
2. If there is no point name for the BS, press [ENT]
on the BS field.
3.
In the AZ field, enter the azimuth angle to the
BS point.
If you press [ENT] without entering a value in
the AZ field, the azimuth is automatically set
to 0°00'00".
4.
Sight the BS point and press [ENT] . ST and F1
records are stored in the job.
You can also use the
F2
softkey for F1/F2
measurements. See Advanced feature:
Measuring F1 and F2, page 69.
Backsight point
Azimuth
Station point
(Xi, Yi, Zi)
Ins
tr
u
m
e
n
t he
ig
ht
X
Z
X0
Y0
Y