Nikon NPL-302 Series, Instruction Manual

Page: 84 / 234

4 Applications
64 Pulse Laser Station NPL-302 Series Instruction Manual
HA Reset and Angle Operations
4.1
To open the Angle menu, press [ANG] in the BMS.
To select a command from this menu, either press
the corresponding number key, or press
[<] or [>] to
highlight the command and then press [ENT]
Setting the horizontal angle to 0
41.1
To reset the horizontal angle to 0, press [1] or select
0-Set
in the Angle menu. The
display returns to the Basic Measurement Screen (BMS).
Entering the horizontal angle
41.2
To display the HA Input screen, press [2] or select
Input
in the Angle menu. Use the numeric keys
to enter the horizontal angle. Then press [ENT] .
Recording a foresight point after repeat angle measurement
41.3
1.
To activate repeat angle measurement, press
[3] or select
Rept.
in the Angle menu.
HR=0
appears.
2.
Sight the backsight and press [ENT] .
3.
Sight the foresight and press
[ENT]
.
The horizontal angle is accumulated and the
value is held again.
4.
To end repeat angle measurement, press
[ESC]
.
F1/F2 is not supported by the NPL-332.
To enter 123°45'50", type
[1] [2] [3] [.] [4] [5] [5] [0]
.
The displayed value is rounded to the minimum angle increment.