Nikon NPL-302 Series, Instruction Manual

Page: 171 / 234

Menu Key 5
Pulse Laser Station NPL-302 Series Instruction Manual 151
Searching records
50.1
You can search for records by their type, point name, code, or by any combination
of these values.
Searching raw records
In the RAW screen, press the
Srch
softkey to
access the raw data search function.
To find a point by name, enter the name in the PT
field and press
[ENT] twice.
You can use the asterisk (*) as a wildcard. For
example, when you enter
30*
in the PT field, the
search matches the points named 300, 301, 302,
3000A2, and 3010.
If you change the ST or HI values, the coordinates of observation points are not
recalculated. A comment record is stored to record the change. The following
example shows a comment record for a changed HI value:
CO,HI changed at ST:9012 Old HI= 1.345m
If you change the BS or AZ values, raw records are not recalculated. A comment
record is stored to record the change.
To search by point type, move to the Type field
and use
[<]
or
[>]
to change the selected point
type. The options are ALL, ST, SS, SO, CP, CO,
CO(SY), and CO(RDM).