- 17 -
3.2
Display LED
The display LED is located on the front panel and shows the
scanner status.
Steady illumination:
Lights when power is supplied (READY
status).
Blinking (about once every 1.5 seconds):
Blinks slowly during operation (BUSY status).
Also blinks when the power is switched on
and during initialization.
Fast blinking (about 5 times a second):
Blinks fast when an error occurs either in the
LS-1000 or in communication (ERROR
status).
Note:
The blinking cycle may sometimes be irregular, but this does
not necessarily signify a product malfunction.
Status display LED
