Nikon KEYMISSION 360, Quick Start Manual

Page: 20 / 178

6
Getting Started
If a plug adapter* is included with your camera, securely connect it to the Charging AC
Adapter. Once the two are connected, attempting to forcibly remove the plug adapter
could damage the product.
* The shape of the plug adapter varies according to the country or region in which the
camera was purchased.
This step can be omitted if the plug adapter comes permanently bonded to the
Charging AC Adapter.
•
Charging starts when the camera is connected to an electrical outlet while the
battery is inserted, as shown in the illustration. The power-on lamp slowly flashes
green while the battery is charging.
•
When charging is complete, the power-on lamp turns off. Unplug the Charging AC
Adapter from the electrical outlet, and disconnect the USB cable.
Charging time is about 2 hours and 20 minutes for a fully exhausted battery.
•
The battery cannot be charged when the power-on lamp quickly flashes green,
possibly due to one of the reasons described below.
- The ambient temperature is not suited to charging.
- The USB cable or Charging AC Adapter is not properly connected.
- The battery is damaged.
B
Notes About the USB Cable
•
Do not use a USB cable other than the UC-E21. Using a USB cable other than the UC-E21
could result in overheating, fire or electric shock.
•
Check the shape and direction of the plugs and do not insert or remove the plugs at an angle.
B
Notes About Charging with the Charging AC Adapter
The camera can be operated while the battery is charging, but the charging time increases.
Charging the Battery
1
Power-on lamp
Electrical outlet
USB cable (included)
Charging AC Adapter