Nikon DTM-302 Series, Instruction Manual

Page: 51 / 222

Getting Started 3
Total Station DTM-302 Series Instruction Manual 33
[MODE]
key
30.1
Use the [MODE] key to change the keyboard mode for the current screen.
Changing input mode while entering points or codes
When the cursor is in a point (PT) or code (CD)
field, press
[MODE] to change the input mode
between alphanumeric (
A
) and numeric (
1
).
The input mode indicator in the status bar changes
to show the current input mode.
Header characters
The following header characters can be used in DSP screens:
A colon (:) indicates that tilt correction is applied
to the value.
A hash symbol (#) indicates that tilt correction is
off.
An underscore (_) under the tilt correction
character indicates that Sea Level Correction or
Scale factor is applied.
When the cursor is in a height (HT) field, only numeric input mode is available.
Pressing
[MODE]
has no effect when the cursor is in a HT field.