Nikon DTM-302 Series, Instruction Manual, Page: 47 / 222

Getting Started 3
Total Station DTM-302 Series Instruction Manual 29
Status bar
31.1
The status bar appears on the right side of
every screen. It contains icons that indicate
the status of various system functions.
Signal indicator
The signal indicator shows the reflected light intensity:
Input mode indicator
The Input mode indicator only appears when you are entering points or coordinates.
It shows the data input mode:
Level 4 (maximum)
Level 3
Level 2
Level 1 (minimum)
If this icon is blinking, the signal is flickering.
If this icon is blinking rapidly, the signal is low.
If this icon is blinking slowly, there is no signal.
If there is no icon, analog power for EDM is off.
Input mode is numeric. Press a key on the number pad to enter the
number printed on the key.
Input mode is alphabetic. Press a key on the number pad to enter the first
letter printed beside the key. Press the key repeatedly to cycle through all
the letters assigned to that key.
For example, to enter the letter O in alphabetic mode, press
[5]
three times.
Status bar