4
Applications
86
Total Station DTM-302 Series Instruction Manual
Using
[DSP]
to switch between display screens
Press
[DSP]
to switch between the Stakeout display screens. The following screens
are available:
The ARC5 screen is only available if the secondary distance unit is set. For more
information, see Others settings, page 132.
Every time you press
[DSP]
, the next screen appears. If you press
[DSP]
in the last
screen (ARC4 or ARC5), the ARC1 screen appears.
To record the point, press
[ENT]
on any observation
screen. The arc is stored in comment records.
Sample records
CO,Arc P1:583 AZ1=0.0000 P2:102
CO, AZ2=311.2932 Radius=50.0000 Length=125.6637
CO, Sta= -12.6876 Offset= 1.3721 dZ= 0.0971
SS,17,1.0000,6.9202,18.4700,80.3120,15:48:48,2REF-LINE
ARC1
ARC2
ARC3
ARC4
Sta
O/S
dZ
X
Y
Z
HA
VA
SD
HA
VD
HD
ARC5
HD
VD
SD
Summary of Contents for DTM-302 Series
