66
Wind noise reduction
Enable or disable wind noise reduction using the
built-in microphone’s low-cut filter (
Destination
When two memory cards are inserted, you can
choose the card to which movies are recorded
(
Monitor brightness
Press
1
or
3
to adjust monitor brightness (note
that this affects live view only and has no effect on
photographs or movies or on the brightness of the
monitor for menus or playback;
45).
Multi-selector
power aperture
Select
Enable
to enable power aperture. Press
1
to
widen the aperture,
3
to narrow the aperture.
Multi selector
exposure comp.
Selecting
Enable
allows exposure compensation to
be set by pressing
1
or
3
.
Highlight display
If
Pattern 1
or
Pattern 2
is selected, shading will be
used to indicate highlights (bright areas of the
frame). The level of brightness needed to trigger
the highlight display can be selected using Custom
Setting g2 (
Highlight brightness
,
Headphone volume
Press
1
or
3
to adjust headphone volume.
Electronic VR
Select
On
to enable electronic vibration reduction
in movie mode. Not available at frame sizes of 1920
× 1080 (slow-mo) and 3840 × 2160 (
69). Note
that if the electronic vibration reduction is on, the
angle of view is reduced and the edges of the frame
will be cropped out.
Option
Description
Highlights
Pattern 1
Pattern 2
Summary of Contents for D850
Page 399: ......