Nikon D7100, User Manual

Page: 266 / 384

238
U
Choose how long the monitor remains on when no operations
are performed during playback (
Playback
; defaults to 10 s) and
image review (
Image review
; defaults to 4 s), when menus
(
Menus
; defaults to 1 minute) or information (
Information
display
; defaults to 10 s) are displayed, or during live view and
movie recording (
Live view
; defaults to 10 minutes). Choose a
shorter monitor-off delay for longer battery life.
Choose how long the camera will remain on stand-by in remote
control mode (
0 127). If no operations are performed for the
selected period, remote shooting will end and
Off
will
automatically be selected for
Remote control mode (ML-L3)
in
the shooting menu. Choose shorter times for longer battery life.
Choose the pitch and volume of the beep that sounds when the camera focuses
using single-servo AF (
AF-S or when single-servo AF is selected for AF-A ;
0
71), when
focus locks during live view photography, while the release timer is counting down in
self-timer (
0
59) and delayed remote modes (
0
127), when a photograph is taken in
quick-response remote or remote mirror-up mode (
0
127), or if you attempt to take
a photograph when the memory card is locked (
0
31). Note that a beep will not
sound in movie live view (
0
161) or quiet-shutter release mode (mode
J
;
0
57),
regardless of the option selected.
• Volume : Choose
3
(high),
2
(medium),
1
(low) or
Off
(mute).
When an option other than
Off
is selected,
c
appears in the
information display.
• Pitch : Choose
High
or
Low
.
c4: Monitor off Delay
G
button ➜
A
Custom Settings menu
c5: Remote on Duration (ML-L3)
G
button ➜
A
Custom Settings menu
d: Shooting/Display
d1: Beep
G
button ➜
A
Custom Settings menu