Nikon D7100 User Manual Download Page 222

Page: 222 / 384

194

Calendar Playback

To view images taken on a selected date, press the

(

) button when 72 images

are displayed.

The operations can be performed depend on whether the cursor is in the date list or
the thumbnail list:

Full-frame

playback

Thumbnail playback

Calendar playback

Use

Description

Toggle between date

list and thumbnail list

(

Press

(

) or

button in date list to place cursor in

thumbnail list. Press

(

) again to return to date list.

Exit to thumbnail

playback/Zoom in on

highlighted photo

(

)

•

Date list

: Exit to 72-frame playback.

•

Thumbnail list

: Press and hold

(

) button to zoom

in on highlighted picture.

Highlight dates/

Highlight images

•

Date list

: Highlight date.

•

Thumbnail list

: Highlight picture.

Toggle full frame

playback

•

Thumbnail list

: View highlighted picture.

Delete highlighted

photo(s)

(

)

•

Date list

: Delete all pictures taken on selected date.

•

Thumbnail list

: Delete highlighted picture (

197).

Change protect

status of highlighted

photo

(

)

See page 196 for more information.

Return to shooting

mode

Monitor will turn off. Photographs can be taken
immediately.

Retouch photo or

trim movie

Create retouched or trimmed copy of photograph or
movie highlighted in thumbnail list (

173, 273).

(

)

(

)

(

)

(

)

Thumbnail list

Date list

Summary of Contents for D7100

































































































































































































































































































































































































Search results

Summary of Contents for D7100

Reviews:

Related manuals for D7100

Brands by name

Popular brands

Nikon D7100, User Manual

Search results

Summary of Contents for D7100

Reviews:

Related manuals for D7100

Brands by name

Popular brands