Nikon D610, User Manual

Page: 132 / 368

106
S
A
AUTO
If the mode dial is rotated to
P
,
S
,
A
, or
M
after
AUTO
is selected for ISO sensitivity in another
mode, the ISO sensitivity last selected in P , S , A , or M mode will be restored.
A
Hi 0.3–Hi 2
The settings Hi 0.3 through Hi 2 correspond to ISO sensitivities 0.3–2 EV over ISO 6400 (ISO
8000–25600 equivalent). Pictures taken at these settings are more likely to be subject to
noise (randomly-spaced bright pixels, fog, or lines).
A
Lo 0.3–Lo 1
The settings Lo 0.3 through Lo 1 correspond to ISO sensitivities 0.3–1 EV below ISO 100 (ISO
80–50 equivalent). Use for larger apertures when lighting is bright. Contrast is slightly
higher than normal; in most cases, ISO sensitivities of ISO 100 or above are recommended.
A
The Shooting Menu
ISO sensitivity can also be adjusted using the ISO sensitivity
settings option in the shooting menu ( 0 214).
A
See Also
For information on choosing the ISO sensitivity step size, see Custom Setting b1 ( ISO
sensitivity step value ;
0
224). For information on displaying ISO sensitivity in the control
panel or adjusting ISO sensitivity without using the W ( S ) button, see Custom Setting d3
( ISO display and adjustment ; 0 229). For information on using the High ISO NR option in
the shooting menu to reduce noise at high ISO sensitivities, see page 218.