383
U
Adjust settings for optional WR-R10 wireless remote controllers
and for optional radio-controlled flash units that support
Advanced Wireless Lighting.
❚❚
LED Lamp
Enable or disable the status LEDs on a WR-R10 wireless remote
controller mounted on the camera. For more information, see the
documentation supplied with the wireless remote controller.
❚❚
Link Mode
Choose a link mode for connection to WR-R10 wireless remote
controllers mounted on other cameras or radio-controlled flash
units that support Advanced Wireless lighting. Be sure that the
same mode is selected for the other devices.
Regardless of the option selected for
Link mode
, signals from
paired wireless remote controllers will always be received by the
WR-R10. Users of the WR-1 remote controller will need to select
pairing as the WR-1 link mode.
Wireless Remote (WR) Options
G
button
➜
B
setup menu
Option
Description
Pairing
To pair the camera with other devices, mount the WR-R10 on
the camera and press the pairing button.
PIN
Connect by entering the device PIN
code. Press
4
or
2
to highlight digits
and press
1
or
3
to change, then press
J
to enter and display the selected PIN.
A
The WR-R10 Wireless Remote Controller
The WR-R10 connects to the camera using a WR-A10 adapter. Be sure
the firmware for the WR-R10 has been updated to the latest version. For
information on firmware updates, see the Nikon website for your area.