204
Technical Not
es—Specifi
ca
tions
Autofocus
Detection range
–1 – +19 EV (ISO 100 at 20 °C/68 °F)
AF-area mode
Single-area AF, dynamic-area AF, group dynamic-AF, dynamic-
area AF with closest subject priority
Focus lock
Focus can be locked by pressing shutter-release button halfway
(single-servo AF) or by pressing
AE-L/AF-L
button
TTL phase detection by Nikon Multi-CAM1000 autofocus sen-
sor module
Exposure
Metering
Three-mode through-the-lens (TTL) exposure metering
Matrix
3D color matrix metering II (type G and D lenses); color matrix
metering II (other CPU lenses); color matrix metering available
with non-CPU lenses if user provides lens data; metering per-
formed by 1,005-segment RGB sensor
Center-weighted
Weight of 75% given to 6, 8, 10, or 13-mm circle in center of
frame
Spot
Meters 3-mm circle (about 2.0% of frame) centered on active
focus area (on center focus area when non-CPU lens is used)
Range
(ISO 100 equivalent, f/1.4
lens, 20 °C/68 °F)
0 – 20 EV (3D color matrix or center-weighted metering)
2 – 20 EV (spot metering)
Exposure meter coupling
Combined CPU and AI
Exposure control
Operating mode
Programmed auto with fl exible program; shutter-priority auto;
aperture priority auto; manual
Exposure compensation
–5 – +5 EV in increments of /, /, or 1 EV
Bracketing
Exposure and / or fl ash bracketing (2–9 exposures in increments
of /, /, /, or 1 EV)
Exposure lock
Luminosity locked at detected value with
AE-L/AF-L
button
Shutter
Speed
30 – / s in steps of /, /, or 1 EV, bulb
Electronically-controlled vertical-travel focal-plane shutter
ISO Sensitivity (Recom-
mended Exposure Index)
100– 1600 in steps of /, /, or 1 EV with additional settings up to
1 EV over 1600; auto gain to 1600
White balance
Bracketing
2–9 exposures in increments of 1, 2, or 3
Auto (TTL white-balance with 1,005 pixels RGB sensor), six
manual modes with fi ne-tuning, color temperature setting, and
preset white balance
