138
Error Messages
Refer to the table below if an error message is displayed.
Error Messages
Display
Cause/Solution
A
Battery temperature is
elevated. The camera
will turn off.
The camera turns off automatically. Wait until the
camera or battery temperature has cooled before
resuming use.
–
The camera will turn off
to prevent overheating.
Memory card is write
protected.
The write-protect switch is in the “lock” position.
Slide the write-protect switch to the “write” position.
–
This card cannot be
used.
An error occurred while accessing the memory card.
•
Use an approved memory card.
•
Check that the terminals are clean.
•
Confirm that the memory card is correctly inserted.
This card cannot be
read.
Card is not formatted.
Format card?
The memory card has not been formatted for use in
the camera.
Formatting deletes all data saved on the memory
card. If you need to keep copies of any images, make
sure to press flexible button 4 (
S
No
) and save the
copies to a computer or other medium before
formatting the memory card. Press flexible button 3
(
R
Yes
) to format the memory card.
Out of memory.
Delete images or insert a new memory card.
Image cannot be saved.
An error occurred while saving the image.
Insert a new memory card or format the memory
card or internal memory.
The camera has run out of file numbers.
Insert a new memory card or format the memory
card or internal memory.
There is insufficient space to save the copy.
Delete images from the destination.
No further pictures can
be graded.
200 images have already been graded or added to
favorites.
Remove some grades or remove some images from
favorites.
Album is full. No further
pictures can be added.