109
Basic Camera Setup: The Setup Menu
S
h
ooti
n
g
, Pl
ay
bac
k
an
d
S
e
tup
M
e
nus
i
Sound Settings
Adjust the following sound settings.
k
Auto Off
When the camera is on and a period of time passes without any operations been
done, the camera will enter standby mode (
21) to save power. Once in standby
mode, the power lamp will blink, and if no operations are performed for another
three minutes the camera turns off. The time taken to enter standby mode can be
set to [30s], [1m] (default setting), [5m], or [30m].
C
Notes on Auto Off
Regardless of the option selected, the monitor will remain on for three minutes when menus are
displayed, or for 30 minutes during continuous playback for slide shows or when the AC adapter is
connected.
Button sound
Turn button sound [On] or [Off].
When [On] (default setting) is selected, a beep will sound once when operations are
completed successfully, two times when focus has been locked, and three times
when an error is detected , and welcome sound.
Shutter sound
Choose shutter sound from [On] (default setting) or [Off].