Refere
E
30
Connecting the Camera to a Printer (Direct Print)
Connecting the Camera to a Printer
1
Turn off the camera.
2
Turn on the printer.
•
Check printer settings.
3
Connect the camera to the printer using the included USB cable.
•
Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle,
and do not use force when connecting or disconnecting the plugs.
4
The camera is automatically turned on.
•
When properly connected, the
PictBridge
startup
screen (
1
) will be displayed in the camera monitor,
followed by the image selection screen (
2
).
B
If the PictBridge Startup Screen Is not Displayed
Turn the camera off and disconnect the USB cable. Set the
Charge by computer
option (
78) in
the camera’s setup menu to
Off
, then connect the camera again.
4 / 4
15 / 05 / 2012
1
2
Summary of Contents for CoolPix S4300
