Nikon COOLPIX S2700, Reference Manual

Page: 163 / 204

E
59
The Setup Menu
Refere
nce S
e
ct
io
n
Sound Settings
Adjust the following sound settings.
B
Note About Sound Settings
In Pet portrait scene mode, button and shutter sounds are disabled.
Auto Off
When the camera is on and a period of time passes without any operations having
been performed, the monitor will be turned off and the camera will enter standby
mode (
A
21) to save power. In this option, set the time allowed to elapse before
the camera enters standby mode. 30 s , 1 min (default setting), 5 min , and 30 min
can be selected.
C
When the Monitor Turns off for the Power Saving Function
• Power-on lamp flashes in standby mode.
• Camera turns off after approximately three minutes passes in standby mode.
• To reactivate the monitor while the power on lamp is flashing, press any of the following buttons:
- Power switch, shutter-release button,
A
button,
c
button or
b
(
e
movie-record) button
C
Auto Off Settings
• The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
- When a menu is displayed: three minutes
- During slide show playback: up to 30 minutes
- When the AC adapter EH-62G is connected: 30 minutes
• The camera does not enter standby mode when transferring images using an Eye-Fi card.
Press the
d
button
M
z
tab
M
Sound settings
Option Description
Button sound
Select On (default setting) or Off . When On is selected, a beep
will sound once when operations are completed successfully,
twice when the camera acquires focus on the subject, and
three times when an error is detected. Start-up sound will also
play when the camera is turned on.
Shutter sound
Select On (default setting) or Off . No sound is played with
shutter release when some features such as continuous
shooting or BSS (Best Shot Selector) are enabled or recording
movies, even if
On is selected.
Press the
d
button
M z
tab
M
Auto off