33
Using the Flash
Bas
ic Ph
otography an
d Pl
ayba
ck
:
A
(Auto)
M
o
de
Setting the Flash Mode
1
Press the
K
(flash pop-up) button.
•
Built-in flash is raised.
•
When the built-in flash is lowered, the flash mode is fixed to
W
(Off ).
2
Press
m
(flash mode) on the rotary multi
selector.
•
The flash mode menu is displayed.
3
Use the rotary multi selector to choose the
desired mode and press the
k
button.
•
When the manual flash is chosen, choose the flash
output with
J
or
K
before pressing the
k
button.
•
The mode selected for the flash is displayed.
•
When
U
(Auto) is applied,
D
is only displayed for
a few seconds even if monitor indicators (
14) are
turned on.
•
If the
k
button is not pressed within a few seconds, the
selection is set and the setting menu disappears.
B
Lowering the Built-in Flash
When not using the built-in flash, gently push to lower the flash until
it clicks shut.
Auto
1/
250
1/
250
1/
250
32
32
32
F5.6
F5.6
F5.6
