Nikon Coolpix L29, Reference Manual

Page: 123 / 156

E
71
Re
fe
ren
ce
S
ect
io
n
Eye-Fi Upload
Select whether or not the camera’s Eye-Fi card (available from third-party manufacturers)
sends images to your computer.
B
Notes About Eye-Fi Cards
•
Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.
•
Remove your Eye-Fi card from the camera where wireless devices are prohibited. Signals may be
transmitted even if
Disable is selected.
•
Refer to the instruction manual of your Eye-Fi card for more information. In the event of
malfunction, contact the card manufacturer.
•
The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions.
•
The camera is not compatible with the Endless Memory function. When it is set on a computer,
disable the function. If the Endless Memory function is enabled, the number of images taken may
not be displayed correctly.
•
Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless
devices.
•
Leaving the setting as Enable will result in the batteries being depleted in a shorter period of time.
C
Eye-Fi Communication Indicator
The communication status of the Eye-Fi card in the camera can be confirmed in the monitor (
A
3,
5).
•
w
: Eye-Fi upload is set to Disable .
•
x
(lights): Eye-Fi upload enabled; waiting to begin upload.
•
x
(flashes): Eye-Fi upload enabled; uploading data.
•
y
: Eye-Fi upload enabled but no images available for upload.
•
z
: An error occurred. The camera cannot control the Eye-Fi card.
d
button
M z
tab
M
Eye-Fi upload
M k
button
Option Description
b
Enable Upload images created by the camera to a preselected destination.
c
Disable (default setting) Images are not uploaded.