Nikon AF-S VR DX Zoom Nikkor 18-200/3.5-5.6G ED, Repair Manual

Page: 70 / 98

JAA79471-R.3678.A
- A52 ･ AF-S VRDX18-200/3.5-5.6G -
VR ADJUSTMENT
When performing the VR adjustment, please refer to the [Instruction Manual] attached to the VR lens adjustment
equipment (J15380).
Preparation for the VR adjustment
①
Set up the VR lens adjustment equipment (J15380) as shown in Figure below.
②
Connect the personal computer to the equipment and run the personal computer.
③
Mount the lens on the equipment. Set the focus ring to the infinity position and the zoom ring to TELE side.
Please refer to the next page for the procedure to mount the lens.
WARNING
●
This equipment uses the laser beam.
Do not look into the laser beam directory.
!
Notes:
The distance from the laser beam outgoing port to the radiation face should be about 5m apart.
Do not intercept the optical path of the laser beam.
RS232C cable
Laser beam outgoing port
VR lens adjustment equipment
（
J15380
）
Personal computer
Laser beam
Power switch
「
SERVO
」
switch
「
VIBRATION
」
switch
INC