background image

D

39

D

Flash modes and functions

Wireless multiple flash shooting

With the SB-900, the “Advanced” and “SU-4 type” wireless flash operations are 
available.

The Advanced Wireless Lighting mode is automatically set as the default.
Advanced Wireless Lighting is recommended for standard multiple 
flash photography.
SU-4 type wireless multiple flash, set the wireless flash mode to “SU-4” in the 
custom setting. (

k

C-22)

Flash shooting with Advanced Wireless Lighting

Available when the SB-900 is used with CLS-compatible cameras.
Compatible with i-TTL flash mode.
In this mode, you can divide the remote flash units into three groups and set the 
flash mode and flash output level compensation values separately for each group.

SU-4 type wireless multiple flash shooting

SU-4 type wireless multiple flash is particularly suitable for shooting fast 
moving subjects as both the master flash unit and remote flash units 
fire simultaneously.
There are no restrictions as to which cameras can be used.
Speedlight featuring wireless multiple flash capability can be used either as 
the master or remote flash unit.
Speedlights compatible with TTL auto flash can be used as the master flash 
unit. The optional Wireless Slave Flash Controller SU-4 is necessary when you 
want to use these Speedlights as remote flash units.
The camera’s built-in flash can also be used as a master flash unit.




t

 Master fl ash unit and remote fl ash unit(s)

In this user’s manual, a flash unit mounted on the camera, the camera’s built-in 
flash, or the one directly connected to the camera via a TTL Remote Cord is called 
the master flash unit. All other flash units are called remote flash units.

Summary of Contents for 4807 - SB 900 Speedlight

















































































































































Reviews: