Nikon 25595, User Manual

Page: 65 / 124

53
Connecting to a Computer
Conne
cti
ng to
Te
levi
sions, Comp
ute
rs and Printe
rs
D
Using Standard OS Operations to Open Camera Files
Navigate to the folder on the computer’s hard disk to which pictures were saved and open a picture
in the viewer supplied with your operating system.
D
Panorama Creation with Panorama Maker
• Use a series of pictures taken using the Panorama assist option in scene mode (
A
38) to create
a single panorama photo with Panorama Maker.
• Panorama Maker can be installed to a computer using the supplied Software Suite CD.
• After installation is complete, follow the procedure described below to start Panorama Maker.
Windows
Open All Programs ( Programs under Windows 2000) from the Start menu > ArcSoft
Panorama Maker 4 > Panorama Maker 4 .
Macintosh
Open Applications by selecting Applications from the Go menu, and double-click the
Panorama Maker 4 icon.
• For more information on using Panorama Maker, refer to the on-screen instructions and help
information contained in Panorama Maker.
D
Image File Names and Folder Names
See, “Image File and Folder Names” (
A
92) for more information.
For Users of Windows 2000 Professional
Use a card reader or similar device to transfer the pictures stored on the
memory card to the computer.
If the memory card has a capacity greater than 2 GB, or is SDHC-compliant,
the intended device must support these features of the memory card.
• At the Nikon Transfer default settings, Nikon Transfer will start
automatically when a memory card is inserted into the card reader or
similar device. See step 5 above to transfer pictures.
• Do not connect the camera to the computer. If the camera is connected
to the computer, the
Found New Hardware Wizard dialog will be
displayed. Select Cancel , close the dialog, and disconnect the camera
from the computer.
• To transfer pictures stored in the camera’s internal memory to the
computer, the pictures must first be copied to a memory card using the
camera (
A
89).