mm
OFF
ON/ZERO
HOLD
ADD
SUB
DIGITAL HEIGHT GAUGE
Model No.:VHS-30D/VHS-60D
<combined>
INSTRUCTION MANUAL
Thank you for purchasing the Digital Height Gauge.
Please read this manual thoroughly before use for proper operation.
Scribe
Fine Adjust Carriage
Post
Fine Adjust Lock Screw
Clamp Lever
Base
Base Reference Surface
Crank Wheel
[OFF] Button
Battery Cover
LCD Display
[HOLD] Button
[ON/ZERO] Button
[ADD
＋
] Button
[SUB
−
] Button
Scribe Clamp
Jaw
Scribe Clamp Screw
PART IDENTIFICATION
Measuring Surface
(w/ Carbide Tip)
【
ACCESSORIES
】
SR44 Silver Oxide Battery (For test)
Dial Indicator
Driver for Battery Cover
Dial Indicator Holder
Model: WTI-8038S
Indicator Mounting Arm
8mm Mounting Hole
Indicator Clamp Screw
6mm Mounting Hole
Dovetail
SR44
APPLICATIONS and FEATURES
●
Smooth operation of slide carriage using crank wheel.
●
Ideal for measuring and marking work for molds, jigs, and tooling.
●
Accessory arm for mounting 8mm or 6mm dial indicator.
●
Easy to ready digital display.
●
Origin can be set at any position.
●
Preset function.
●
HOLD function.
・
Before using for the first time, please wipe off the corrosion
protectant with an oiled cloth.
・
This is a precision instrument, handle with care. Do not drop or
subject to excessive forces.
・
Please avoid damage to post. Do not scratch instrument, for
example by writing ID number.
・
Keep away from direct sunlight. Do not store instrument in
extreme temperatures.
・
When measuring using a dial indicator in place of scribe,
values for instrument error will vary from listed specifications.
How to Use Each Button
[ON/ZERO] Button
1
●
When power is OFF, press once to turn ON.
●
When power is ON, press once to set display to
“
0.00mm
”
.
[OFF] Button
2
Press to turn OFF power.
[HOLD] Button
4
Press to freeze (hold) the reading, and the LCD will display the
“
HOLD
”
icon.
[ADD
＋
] , [SUB
−
] Buttons
3
Allows operator to change display reading to any value.
Press [ADD
＋
] to increase value by 0.01mm, or [SUB
−
] to
decrease by 0.01mm. Press and hold to quickly increase or
decrease value.
Any number can be preset into instrument for a position using
these buttons.
NOTES
