Nidek Medical SE-9090 Supra, Service Manual

Page: 217 / 350

LLE7D*RDA002B
205
8.14.1.2.2 Bevel axis adjustment
1 . Display the menu screen (see 8.1.1 [p167]) .
2 . Press [Axis adjustment] on the menu
screen.
3 . Select the bevel tab to display the
Bevel axis [deg] parameters.
4 . Press each of the following parameter
fields.
1 ) Plastic bevel
2 ) Polycarbonate bevel
3 ) Trivex bevel
5 . Adjust the bevel axis by the procedure
below.
1 ) If the lens drops down to the right,
increase each parameter value.
2 ) If the lens rises up to the right,
decrease each parameter value.
3 ) After entering the value with the
numeric keypad, press the Enter key
.
4 ) Press [Exit] to return to the layout
screen.
6 . Confirm the bevel axis (see 8.14.1.1.1
[p198]) .
Select the parameter corre-
sponding to the lens material.
Adjust all parameter settings.
The parameter value can be changed in 0.1 increments.
/
Graph paper
Lens
/
Graph paper
Lens