Nidek Medical SE-9090 Supra, Service Manual

Page: 193 / 350

LLE7D*RDA002B
181
8.8 Grooving ASSY Adjustment
8.8.1 Position adjustment
1 . Attach the arm position adjustment jig (40300-0980) by the procedure below.
1 ) Remove the lens adapter (40251-M045) (see 7.5.1 [p161]) .
2 ) Remove the wheels from the right processing ASSY (40274-7200) (see 7.1.27
[p125]) .
3 ) Loosen SB4 × 15 (n = 2) to remove
the bracket (40300-M117) of the arm
position adjustment jig (40300-
0980).
4 ) Attach the arm position adjustment
jig (40300-0980) to the right pro-
cessing ASSY (40274-7200).
5 ) Adjust the position of the right pro-
cessing ASSY (40274-7200) along
with the arm position adjustment jig
(40300-0980) so that the chuck shaft
aligns with the area indicated by “A”.
6 ) Fasten the arm position adjustment
jig (40300-0980) to the lower shaft
(40273-M303) with the bracket
(40300-M117).
Caution
Hold the arm position
adjustment jig by hand.
Tighten SB4 × 15 (n = 2)
on the bracket.
5$˜
/
#
/
5$˜
/